Knitting

Original pullovers: 5 interesting models with descriptions and diagrams

The original knitted pullover will help you to replenish your wardrobe with an exclusive thing. Knitting patterns with a detailed description will help you make your dream come true, and you can choose the color of the yarn to your taste.

1.

Dimensions
38/40

You will need
Yarn (40% merino wool, 30% viscose, 20% polyamide, 10% cashmere; 90 m / 50 g) - 400 g beige and 200 g sulfur; Knitting needles number 5; circular needles number 5.

Garter bandage
Front and back rows - front loops.

Rhombus A
To collect 63 loops on the spokes and to tie up 1 purl row with facial ones; this series is not taken into account in subsequent indications of the number of rows.

Continue to work according to Scheme 1. It contains the 1st half of a rhombus with an average loop. To add the 2nd half in mirror image, to do this, read the loops of the diagram without the middle loop from left to right, instead of tying loops together with a slope to the left, knit 2 loops together on the front and for the "braid" constantly cross 6 loops left.

The diagram shows the front rows. In the purl ranks knit all the loops by drawing or according. instructions.

After 60 rows from the initial row, knit the remaining 3 loops, like 1 double tilt loop to the left, cut the thread and pull it through the last loop.

Rhombus B
Knit like rhombus A, but after 52 rows from the initial row close the remaining 11 items as purlins.

Pattern of "braid"
The number of loops is a multiple of 8 + 2 edge = knit acc. Scheme 2. It shows the front rows. In the purl ranks knit all the loops on the picture.

Between the edge constantly repeat rapport. Constantly repeat the 1-8th ranks.

Elastic
Rows in the forward and reverse direction (the number of loops is a multiple of 4 + 2 edging). Hem, * 1 purl, 2 facial, 1 purl, from * constantly repeat, edging.

Circular rows (the number of loops is a multiple of 4): alternately 2 face, 2 purl.

Flat seams
The outer loops of the garter-knit diamonds after the facial and purl row form a visible "knot". For the seam, connect the knots of the aligned edges with an overcasting seam butt.

If the "nodular" edge coincides with the initial row, butt one nodule with 1 loop of the initial row, respectively.

With the coincidence of the initial rows in the middle of the front, connect the loops of the initial rows with an overcasting stitch butt joint.

Knitting density
Diamond A - width 33 cm, height 27.5 cm;
rhombus B - width 33 cm, height 25.5 cm;
21 p. X 22.5 p. = 10 x 10 cm, connected by a pattern of "braids" (measured in a slightly stretched form);
19 p. X 23 p. / Circle. R. = 10 x 10 cm, connected by a rubber band (measured in a slightly stretched form).

Attention!
The size of the rhombus is obtained by measuring the model.

Sleeves knit from top to bottom. Arrow on the pattern = knitting direction.

Pattern

Back
Run 2 rhombus A and 1 rhombus B with gray thread; Arrows on the pattern = knitting direction. Sew parts according to pattern, performing flat seams.

Before
Knit as back.

Sleeves
Beige thread dial 74 loops and knit a pattern of "braids", while edge knitting only garter stitch.

Through 39 cm = in the 88th row from the initial row (= purl row), knit the 2nd + 3rd loop and the 4th + 5th loop on the each "spit" and the 4th + 5th loop together with the purl = 38 p.

Continue work with a rubber band.

After 25 cm = 58 rows from the beginning of the knitting of the plank, close all the loops in the pattern.

Assembly
The edges with the "braids" of the sleeves and the bevelled lateral edges of the back and front connect 39 cm flat seams.

Due to the different number of rows at the edges of the sleeves there are more knots than at the edges of the rhombus. Therefore, when performing seams, skip approximately every 4th knot of the edges of the sleeves.

The seams of the sleeves also run as flat seams.

Beige thread dial on the circular knitting needles along the edge of the neck 152 loops and for a turn-down collar tie 30 cm with an elastic band in circular rows. Then freely close the loop on the picture.

2.

Dimensions

Plus S / M (M / L) L / XL

You will need
Yarn (100% wool; 50 g / 104 m) - 21 (23) 25 skeins of light beige; Spokes number 4 and 4.5; circular needles No. 4 40 cm long

Pattern "Spit"

Knitting density
22 p. X 32 p. = 10 x 10 cm, connected by the facial surface of the spokes No. 4, 5.

Attention!
The density of knitting must match the given! Therefore, before proceeding to work, you should knit a pattern sample: dial 36 points and knit 14 cm with a satin finish.

Then count the loops in the middle section of the fabricated sample with a length of 10 cm: if there are more than 22 loops in this segment, change the spokes to thicker ones, if less - to thinner ones. The main thing is that the density of your knitting corresponds to a given density in width.

The product is knit on the same needles as the sample. If the instruction contains only one number, then it applies to all sizes.

Back
On needles No. 4.5, dial 78 points and knit with a pattern according to the scheme (1st row = wear row), with at the end of each row dial 2 (3) 4 times 6 points each. First recruited 6 points On both sides to include in the pattern, on the rest of the gathered loops to knit with the front surface.

After the last 6 pts dialed, continue recruiting 4 pts on both sides at the end of each row - a total of 14 times = 214 (226) 240 p.

Through 3 p. after the last row with loops dialed in the next faces. a row to begin to reduce the loops: 1 person., 2 points to knit together the front one, tie up to the last 3 points on the spoke, 1 point to remove, pull the next loop around the front one and remove the loop through the knitted one. These reductions are repeated in every 4th p. (= in every 2nd person. row) - total 11 rows with decreasing.

Link 3 p. after the last row with cuts and mark the beginning of the armhole.

Continue to knit with raglan reductions, but now in every 2nd p. (= in each person. row).

Important!
In the pattern to carry out reductions in the figure. When will 64 (68) 72 p., Close the loop.

Before
Knit like a back, but tie a neck: when the needles will be 82 (86) 90 p., Continue to perform reglits, close the average 30 (34) 38 p. And finish both sides separately.

To round the neck, close the inner edge at the beginning of each row.
4 times 4 p. (While continuing to perform ragland downs!), Then close the remaining loops in the same row.

Right sleeve
On knitting needles No. 4, dial 86 (94) 102 points and knit with an elastic band (= alternately 2 w., 2 persons., 1st row = w. Row). When 16 cm of elastic will be connected, continue to work with the front surface of the needles # 4, 5.

Important!
In the 1st p. reduce loops evenly so that the needles have 76 (84) 92 p.

After 4 p. after the rubber band, add on both sides 1 p. (after / before the edge loops) in each 4th p. - only 10 times = 96 (104) 112 p.

Link 3 p. after the last additions, mark the beginning of the armhole and start the slowdowns: 1 person., 2 points. Tie together, tie up to the last 3 points on the spoke, 1 point. Remove, pull the next loop, and remove the front loop through the knitted one.

Perform ragland downs in every 4th p. (= in every 2nd person. row).

When will 34 p. And be bound 1 p. after the last row with raglan cuts, close for a bevel at the beginning of each person. row (continuing raglannyh downs at the end of the row!) 4 times 6 p., the remaining loops close in the same row.

Left sleeve
Knit, as the right, but the upper bevel - in a mirror image.

Assembly
Stitch parts from the front side with a mattress and knit seam = mattress - longitudinal edges of the parts (= 1 p. X 1 p.), Knitted seam - edges with closed loops.

Run raglany seams, starting from the armhole marks.

Run side seams and sleeve seams.

Lower bar
On circular needles No. 4 dial along the bottom edge of the product from the front side of the loop: start from the right side seam and dial 1 p. From each loop hinge + 1 additional loop for every 2nd loop (the number of loops should be a multiple of 4 p. ).

Knit in a circle with a rubber band (= alternately 2 faces., 2 sleeps.) About 9 cm, then close the loop.

Bake throat
On circular needles No. 4, dial around the edge of the neckline from the front side of the loop: start from the right raglan seam on the back and dial 1 pt from each closed loop around the entire edge of the neck.

Knit in a circle 1 p. facial, uniformly reducing the hinges so that the needles have 132 (140) 148 p. Then knit: 1 p. back, 1 p. face and then continue to work with an eraser (= alternately 2 faces., 2 external).

When the width is 4 cm, close the loop.

3.

Dimensions
36/38 (40/42) 44/46 (48/50)

You will need
Yarn (100% camel wool; approx. 100 m / 50 g) - approx. 650 (700) 750 (800) g red; Knitting needles number 3 and 4; circular needles number 3; 200 (200) 220 (220) cm red satin ribbons 3 mm wide.

Facial surface
The front rows - front loops, purl rows - purl loops.
In the circular rows of all loops knit facial.

Seamy surface
Facial rows - purl loops, purl rows - facial loops.
In the circular rows to loop all the loops.

Gum A
Alternately 2 facial, 2 purl.

Gum In
Alternately 3 facial, 3 purl.

Structural pattern
Knit on an even number of loops:
1st row: chrome., * 1 front, 1 p. To remove, as when seamstress (thread before work), from * repeat, chrome.
2nd + 4th rows: between chrome. knit purl loops.
3rd row: chrome., * 1 p. Remove, as in the case of knitting (thread before work), 1 front, from * repeat, chrome.

In height, repeat from the 1st to the 4th rows.

Pattern "leaflets"
In width 28 p. Schemes knit 1 x. In height 1-4th row perform 1 x

Important!
Pattern "leaflets" performed on the back.

Sequence of patterns
10 (12) 14 (16) p. structural pattern
12 r. pattern "leaflets", 8 (10) 12 (14) p. structural pattern
12 r. pattern "leaflets", * 8 (8-10-10) p. structural pattern
12 r. pattern "leaflets", from * repeat 4 more, finish 18 (22) 24 (28) p. structural pattern = 160 (168) 184 (192) rows.

Cross ribbed pattern
8 r. from smooth
3 p. front surface
8 r. from smooth surface (start from the purse row and finish with the facial row),
3 p. front surface (start and finish with 1 purl near),
8 r. purl, 2 p. front surface = 32 p.

Decorative reductions
Along the right edge: chrome., 2 p. Of the front smoothing, 2 p., Knit together with a tilt to the left (= 1 p. Remove, as in the case of knitting, stretch the next loop with the front one and remove the loop after the knitted one);
on the left: 2 p. knit together with a tilt to the left, 2 p. of the front surface, com.

Double loop
After turning at the beginning of the row, lay the thread before work, enter the needle to the right in the 1st section, remove the loop with the thread. Then pull the thread back strongly = double loop. In the next row, knot both sides of a double loop as one according to a pattern — front or purl.

Knitting density
24 p. X 37 p. = 10 x 10 cm, connected by a structural pattern or leaf pattern;
24 p. X 30 p. = 10 x 10 cm, connected by a cross ribbed pattern.
Both samples are knitted with needles No. 4.

Before
On the spokes number 3 dial 118 (126) 138 (146) loops and tie for the lower slat 6 cm = 20 p. a rubber band A, while in the 1st persons. row after chrome. start with 1 out. loops.

Continue the work of the structural pattern of the spokes №4.

For lateral bevels, add on both sides a pattern in each 14th p. from the lower bar 6 times (in each 14-m p. 3 times and in each 12-m r. 3 times) in each 14-m r. 3 times and in every 12th p. 3 times (in each 12-m p. 5 times and in the next 10-m p. 1 time) 1 p. = 130 (138) 150 (158) p.

For raglan bevels in 25.5 (23) 23 (21) cm = 94 (86) 86 (78) p. From the lower plank, subtract 1 x 1 p. from both sides, then in each 4th p. another 16 (20) 24 (28) x 1 p. (see above decorative increments) = 96 (96) 100 (100) p.

After 18 (22) 26.5 (30.5) cm = 66 (82) 98 (114) p. from the start of the ragland bevels, temporarily leave the remaining neck loops

Back
Knit, as before, but after the lower bar on the middle 28, to carry out the patterns in the above sequence.

Sleeves
On the needles No. 3, dial 42 (46) 50 (54) loops and tie for a slat 6 cm = 20 p. a rubber band A, while in the 1st persons. row after chrome. start with 1 out. loops, and in the last izn. row, evenly distributed, add 4 (6) 8 (10) p. = 46 (52) 58 (64) p.

Continue the work of the structural pattern of the spokes №4.

For bevels add on both sides after the 6th p. gum 1 x 1 p., then in each 6th p. another 12 (8) 4 (0) x 1 p., added loops to include in the pattern.

At the same time through 16.5 (15.5) 14.5 (13.5) cm = 62 (58) 54 (50) n. From the gum to knit with a transverse ribbed pattern = 76 (84) 92 (100) n.

After 10.5 cm = 32 p. from the beginning of the transverse ribbed pattern, continue the work of the structural pattern again.

At the same time, perform raglaned bevels, as on the front, while starting from the 1st subtraction in the 1st row = 42 p.

After 18 (22) 26.5 (30.5) cm = 66 (82) 98 (114) p. from the start of the raglan bevels of the loop temporarily leave.

Assembly
Run the seams, side seams and sleeve seams.

On the right sleeve mark the middle 12 points. Left the loops of all the details translate into circular needles, starting with 12 marked loops of the right sleeve = 276 (276) 284 (284) paragraph. On all the loops, knit in circular rows with an elastic band both sides of the middle 12 loops.

After 9 p. from the beginning of the collar, continue work with shortened rows (after the 9th river. turn the work): double loop, 1 out. to knit a series of up to 12 marked loops and temporarily leave these 12 items, to do this, turn and run a double loop in front of the marked loops.

After that, another 16 x at the end of each next row of 15 p. Leave also = 24 p.

After the last izn. rotate a row, make a new mark of the beginning of a circular row and from the label again knit on all the loops in circular rows.

Run 5 lap. R., while in the 1st round. R. knit double loops according to the pattern together with the next, respectively, previous loop.

After this loop close on the picture.

Pass the satin braid through the holes of the 1st row of the collar placket = start and finish 10 cm from the middle of the front (“stitches” should be laid on the front side over the front tracks).

By means of a band it is possible to regulate depth of cut.

4.

Dimensions

36/38 (40/42) 44/46

You will need
Yarn (40% Angora wool, 37% sheep wool, 14% alpaca wool, 9% nylon; approx. 62 m / 25 g) - approx. 450 (500) 550 g of cognac color; Knitting needles number 5; circular needles number 5.

Facial surface
The front rows - front loops, purl rows - purl loops.
In the circular rows of all loops knit facial.

Garter bandage
Front and back rows - front loops.
When circular knitting knit alternately 1 row of facial, 1 row of purl.

Gum A
Alternately 2 purl, 1 facial.

Relief pattern
Knit according to the above scheme. Distribute loops according to the instructions.

In height, perform 1 x from the 1st to the 24th row, then repeat from the 3rd to the 24th row.

Gain and increase
For the "snubbed" bottom edge: chrome., 1 front, 2 p. Knit together the front, 31 (34) 37 p. Of patterns in a given sequence, 1 p. Add (= 1 of a crossed loop from the broach), 33 (35) 37 n. Of patterns in a given sequence, 1 n. Add, 31 (34) 37 n. Of patterns in the specified sequence, 2 n. Knit together the front, 1 front, chrome.

Knitting density
19 p. X 27 p. = 10 x 10 cm, connected by a relief pattern;
10 p. X 23.5 p. = 10 x 10 cm, connected by the front surface.

Back
Dial 102 (110) 118 loops on the spokes crossed with a double thread and tie 4.5 cm = 10 p for the lower slat. gum, while in the last row, add 1 p. = 103 (111) 119 p.

To continue the work with a relief pattern, distributing the loops as follows: chrome., 7 (9) 11 p. Garter stitch, 21 p. Relief relief, 12 (14) 16 p. Garter stitch, 21 p. Relief relief, 12 (14) 16 P. Garterbinding, 21 p. Relief Pattern, 7 (9) 11 p. Garterbinding, chrome.

Through 62 cm = 168 p. from the gum all the loops close in the same row.

Before
Start as back, but after 33 cm = 90 p. From the elastic for a raised bottom edge, perform a 1-fold increase and increase of loops, as described above. Reception to repeat 6 more times in every 4th p.

After 41 cm = 112 p. from the gum to start forming the neck, for this average 31 (35) 37 p. for the neck temporarily leave and first finish the right side.

For rounding up close at the inner edge in each 2nd p. 1 x 2 p. And 9 x 1 p. = 25 (27) 30 p.

After 21 cm = 56 p. from the beginning of the neck close the remaining shoulder loops.

The second side finish symmetrically.

Sleeves
Dial 44 loops on the spokes crossed with a double thread and tie 9 cm = 20p. rubber band.

To continue the work with the front satin stitch, while in the 1st p., Evenly distributing, add 6 (8) 10 p. = 50 (52) 54 p.

Through 6 p. From the gum, add 1 pp for bevels on both sides, then in each 6th p. another 10 (11) 12 x 1 p. = 72 (76) 80 p.

In 34.5 (33) 31.5 cm = 82 (78) 74 p. from the gum all the loops close in the same row.

Assembly
Run shoulder seams.

For a collar strap, the left 31 (35) 37 s. Translate beforehand into circular knitting needles and in the rounding sections dial another 25 s each; on the edge of the back of the neck, dial 54 (56) 60 p. = 135 (141) 147 p. and tie the 9th circle. R. rubber band.

In the 10th circle. R. 2 p. in each purl track, knit together purses and loop the loops with a needle.

Sleeves sew. Run the seams of the sleeves and side seams.

5.

Dimensions
34/38 (40/44)

You will need
Yarn (100% merino wool; 80 m / 50 g) - 350 (400) g sulfur, (250) g ​​olive, 200 (250) g ​​color. fuchsias and 100 (150) g ​​pistachio; Knitting needles number 5 and 6; short circular needles number 5.

Elastic
The number of loops is a multiple of 4 + 2 + 2 edging.

Edged, alternately 2 purl, 2 facial, 2 purl, edging.
In the front rows of the loop knit by drawing.

Facial surface
The front rows - front loops, purl rows - purl loops.

Garter bandage
Front and back rows - front loops.

Purl stitch
Face and back rows - back loops.

Sequence of bands
12 rows of facial smooth olive thread,
2 rows of garter stitch and purl garter stitch gray thread,
* 4 rows of facial smooth olive thread,
12 rows of facial satin thread col. fuchsias
2 rows of garter stitch and purl garter stitch gray thread,
4 rows of facial satin thread col. fuchsias
12 rows of facial pistachio thread,
2 rows of garter stitch and purl garter stitch gray thread,
4 ряда лицевой гладью фисташковой нитью,
12 рядов лицевой гладью оливковой нитью,
по 2 ряда платочной вязкой и изнаночной платочной вязкой серой нитью,
от * повторить еще 1 раз, закончить 4 рядами лицевой гладью оливковой нитью и 26 (50) рядами лицевой гладью нитью цв. фуксии = всего 166 (190) рядов.

Плотность вязания
16 п. х 25 р. = 10 х 10 см, связано последовательностью полос на спицах №6;
18 п. х 23 р. = 10 х 10 см, связано резинкой на спицах №5 (измерять в нерастянутом виде).

Attention!
Выкройка спинки и переда имеет форму ромба. Размеры в инструкции всегда относятся к внешним краям. Число рядов средних петель в связи с наклонным направлением вязания достигает высоты ок. 83 (95) см.

Стрелка на выкройке = направление вязания и линия средних петель.

Back
Серой нитью на спицы №6 набрать 84 (96) петель и для планки связать 2 см = 5 рядов резинкой, при этом начать с 1 изнаночного ряда.

Continue to work according to sequences of lanes, while for the lateral edge of the olive thread, dial at the end of the 1st front row another 84 (96) new loops and include in the sequence of lanes = 168 (192) p.

For the inclined arrangement of the pattern, first mark the 2 middle loops.

Then, in the 3rd row = front row from the lath / initial row, perform the decrements as follows: knit the 1st middle loop with the previous loop together with the front loop, and knit together with the wrong side in strips of garter bandage; Tie the 2nd middle loop with the next loop together with the front one tilted to the left (remove the middle loop as the front one of the front loop, then stretch it through the looped loop), knit the 2nd middle loop with the next loop together with the reverse = = 166 (190) p.

These reductions will be repeated 81 (93) times in each facial row.

After 66.5 cm = 166 rows (76 cm = 190 rows) from the plank / initial row, close the remaining 4 loops, like the front ones, 2 loops each of them refer to the shoulder and side edges. On the pattern they are calculated by 1 cm.

Before
Knit the same way as the back, but in a mirror image, for this, after the strap, first dial an olive thread with 84 (96) new loops, then add 84 (96) loops of the strap to them.

Sleeves
Use gray thread to make needles No. 5 for each sleeve with 36 (40) loops and knit with an elastic band.

After 3.5 cm = 8 rows from the plank, add 1 x 1 pt for bevel sleeves on both sides, then 6 x 1 p. (8 x 1 p. In each 8th row) in each 12 row acc. pattern = 50 (58) p.

After 40 cm = 92 rows from the initial row, close the sleeve for dummies on both sides 1 x 4 (5) p., Then in each 2nd row freely close another 4 x (4) 5 p.

After 44.5 cm = 102 rows from the initial row freely close the remaining 10 (8) p.

Attention!
The sleeves are not stretched on the pattern; they have an adjacent cut.

Assembly
In connection with the diamond shape of the parts to perform shoulder seams acc. to the pattern for a length of 20 (24) cm from the initial row, from the top for a length of 27 (31) cm, between them leave 20.5 (22) cm open to the neck (see the marks on the pattern).

Use a gray thread to dial on the circular knitting needles along the edge of the neckline 66 (70) loops, close the work into the ring, tie up 1 circular row with the front and 2 circular rows with the wrong side. Then close all the loops, like purlins.

Perform side seams at the starting row on the plank and the next 34.5 (40) cm, on the long edge of the plank and on the next 49.5 (57) cm (see the marks on the pattern *).

For armholes, leave on both sides 18 (20) cm to the shoulder seam.

Run the seams of the sleeves. Sew the sleeves, respectively, tightening the closed edges of the sleeves.